Foshan · ChinaWindow, door and cabinet machinesWhatsApp +65 8084 4116 kakoutang@gmail.com

Aluminium Processing Machines

Aluminium Processing Machines

Machines

31 machines in three lines. Every machine page has photos, what it is used for and, where we have it, specs and video.

Windows & doors

Cut, join, drill and bend. The machines a window workshop runs on.

45 Degree Double Head Miter Saw

45 Degree Double Head Miter SawCuts clean 45° corners on aluminium profiles with two saw blades.

550 Double End Saw (Manual / Fully Automatic)

550 Double End Saw (Manual / Fully Automatic)Cuts both ends of a long profile at the same time. Manual or fully automatic.

45 Degree Dedicated Double End Miter Saw

45 Degree Dedicated Double End Miter SawA double end saw set for 45° cuts. Both ends in one go.

305 Single Head Sliding Miter Saw

305 Single Head Sliding Miter SawA compact single head saw for straight and miter cuts on profiles.

Any Angle Cutting Machine

Any Angle Cutting MachineSet the angle on the digital read-out and cut. For special shapes and frames.

45 Degree Sliding Miter Saw

45 Degree Sliding Miter SawThe blade slides across the profile for clean 45° cuts on wider pieces. Air clamps hold the work.

Corner Joining Machine

Corner Joining MachineJoins two mitred profiles into one strong frame corner.

Hydraulic Shearing Machine (90 Degree / Fully Automatic)

Hydraulic Shearing Machine (90 Degree / Fully Automatic)A hydraulic cutter cuts profiles to length at 90°. Fully automatic version available.

CNC Drilling and Milling Machine (3m Single / Double Head, 750)

CNC Drilling and Milling Machine (3m Single / Double Head, 750)CNC drilling and milling for lock holes, handle holes and slots on aluminium profiles.

Electric / CNC Polygonal Bending MachineBends aluminium window and door profiles into arches, circles and curves.

Aluminium cabinets & furniture

Kitchens, wardrobes and furniture in aluminium: corners, hinge holes, back panel grooves and panels.

405 Lift Table Angle Machine

405 Lift Table Angle MachineThe blade rises from under the table for clean 45° corners on cabinet and furniture profiles.

350 Lift Table Angle Machine

350 Lift Table Angle MachineThe smaller lift table machine for clean 45° corners on cabinet profiles.

Vertical Lift 45 Degree Miter Saw

Vertical Lift 45 Degree Miter SawA vertical lift saw for clean 45° cuts on cabinet and furniture profiles. Linear guide and fully automatic versions.

Fully Automatic 45 Degree Miter Saw

Fully Automatic 45 Degree Miter SawRuns the 45° cutting cycle automatically. Less work for the operator.

Single Head Hinge Drilling Machine

Single Head Hinge Drilling MachineDrills hinge holes in cabinet doors. Same spot, every door.

Back Panel Grooving Machine

Back Panel Grooving MachineCuts the groove that holds the back panel in aluminium cabinet profiles.

T-Bar Cutting Machine

T-Bar Cutting MachineCuts T-bars and thin profiles. Two modes: cut through, or cut without cutting off so the strip can bend into a corner.

90° Inverted Cut-off Saw

90° Inverted Cut-off Saw90° cut-off saw with the blade rising from below the table. Two pneumatic clamps hold the profile.

700 Full Panel Cut-off Saw

700 Full Panel Cut-off SawCut-off saw for wide aluminium panels and profiles, with long roller tables on both sides.

Automatic Panel Saw

Automatic Panel SawPanel saw with a long guide rail and side support tables. The panel stays still, the saw travels.

CNC Full Panel Drilling Machine

CNC Full Panel Drilling MachineCNC drilling across full panels. Set the hole positions on the touch screen.

Automatic Screw Driving Machine

Automatic Screw Driving MachineDrives screws automatically along long profiles. Set the positions on the touch screen.

Ceilings, wall & honeycomb panels

Cut, notch, groove, fold and seal. Machines for aluminium ceiling, wall panel and stainless steel honeycomb panel factories.

Ceiling & Wall Panel Grooving and Folding Machine

Ceiling & Wall Panel Grooving and Folding MachineGrooves and folds the edges of aluminium ceiling and wall panels in one pass along the line.

High-Speed CNC Router

High-Speed CNC RouterCNC router with several spindles on one gantry. Cuts, grooves and drills panels from your drawing.

7.3 m CNC Double End Saw

7.3 m CNC Double End SawLong CNC double end saw for aluminium ceiling beams and long profiles. Set the length on the screen.

305 Corner Cutting & Punching Machine

305 Corner Cutting & Punching MachineCuts the 45° corner and punches the notch on the same machine.

550 Single Head Saw

550 Single Head SawLarge single head saw for aluminium ceiling beams and big profiles.

Auto-Feed Corner Cutting & Punching Machine

Auto-Feed Corner Cutting & Punching MachineThe feeder brings the profile in, and the machine cuts and punches the corners on its own.

Stainless Steel Honeycomb Panel Laser Cutting Machine

Stainless Steel Honeycomb Panel Laser Cutting MachineLaser cutting centre for stainless steel honeycomb panels. Cuts and opens holes on both faces, with nesting software built in.

Stainless Steel Honeycomb Panel Laser Edge Bander

Stainless Steel Honeycomb Panel Laser Edge BanderEdge bander for stainless steel honeycomb panels. The steel strip is laser welded on, then trimmed, sanded and polished.

205 V-Notch Saw

205 V-Notch SawCuts V notches into aluminium profiles so they fold into clean corners.

Tell us what you make.

Your products, your country and your power supply. We reply with machines, a price and freight.

Get a quote Chat on WhatsAppWhatsApp

Chat on WhatsApp